Now loading.
Please wait.

+49 3578 34 95 0

info@prinz24.com

Carbide tipped saw chains

HMS 20/2 Carbide Cut

 

HMS-Hartmetallkette-20 (2)

      Pitch                     Gauge

                   

 

HMS 1/2″/1,6 Carbide Cut

HMS-Hartmetallkette-12 (2)

      Pitch                        Gauge

    

HMS 404″/1,6 Carbide Cut

HMS-Hartmetallkette-404

      Pitch                     Gauge


HMS 20/2 HMS.404″/1,6 HMS ½”1,6
Pitch: 20mm 0,404″ ½”
Gauge: 2mm 1,6mm 1,6mm
Drive links per meter: 25 49 39
Reel of 100 feet: 743 1480 1200
Order number:
Chainsaw in drive links 0060 0070 0090
Chainsaw per 100 ft reel 0060A 0070E 0090E
Connecting link with rivet 0061 0071 0091
Connecting link 0064 0074 0094
Drive link 0062 0072 0092
Rivet 0063 0073 0093
Tooth left 0065 0076 0095
Tooth right 0066 0076/1 0095

This table contains all common bar lenghts and fitting chain types. Other lengths and sizes are available to order!

Hand held electric chain sawsMobile electric wall saws
Cutting depth BRICKCUT ESL PRINZ E21 / E23 PRINZ EED 3,5 / PES 1300
40cm 59 HMS 0.404″/1,6 58 HMS 0.404″/1,6 60 HMS 0.404″/1,6
49 HMS ½”/1,6 49 HMS ½”/1,6
50cm 68 HMS 0.404″/1,6 67 HMS 0.404″/1,6 68 HMS 0.404″/1,6
56 HMS ½”/1,6 56 HMS ½”/1,6
60cm 77 HMS 0.404″/1,6 76 HMS 0.404″/1,6 79 HMS 0.404″/1,6
62 HMS ½”/1,6 65 HMS ½”/1,6
75cm 90 HMS 0.404″/1,6
73 HMS ½”/1,6
90cm 102 HMS 0.404″/1,6
83 HMS ½”/1,6
110cm 126 HMS 0.404″/1,6
101 HMS ½”/1,6
Cutting depth PRINZ PMS60 COMER T10-T80
PRINZ PMS25 Techn.-Cuts M90-93
50cm 39 Tgl. HMS 20/2 39 Tgl. HMS 20/2
60cm 45 Tgl. HMS 20/2 44 Tgl. HMS 20/2
80cm 55 Tgl. HMS 20/2 54 Tgl. HMS 20/2
100cm 65 Tgl. HMS 20/2 64 Tgl. HMS 20/2
110cm 71 Tgl. HMS 20/2 70 Tgl. HMS 20/2
115cm 73 Tgl. HMS 20/2 72 Tgl. HMS 20/2
130cm 80 Tgl. HMS 20/2 80 Tgl. HMS 20/2

The amount of links refers only to the usage of PRINZ – guidance bars (Blades) and can differentiate when using other brands or makes. With the hand held chain saws other chain pitches may also be used. When removing used up chain links, note that during usage it has gotten longer (about 2-4 links). Carbide tipped chains are subject to different wear and tear depending upon the material that was used.

It is therefore nearly impossible to give an exact cutting capacity per chain. The company Prinz continually runs checks for quality assurance. Worn out driving gears (sprockets) and guidance bars need to be exchanged, because otherwise the driving links of the chain will be damaged and the chain will be unusable.

Kontakt